Products
Accessories
The EMP 1.3 Quick Connection Device is used together with electricity meter test systems, and is recommended for high volume production output.
Earth | Ground Systems Testing
The 4025E is the latest revision in our 4025 series of frequency selective multi-meters. It maintains all of the features of the previous models for measuring the I/V magnitudes and phase of signals induced into an earth loop via high power current injection.
Earth | Ground Systems Testing
The ECT-4 is a 4 wire Kelvin micro-ohm meter used to check the electrical quality of metallic structures and their connection integrity to other bonded structures in grids and electrical systems such as a sub-station or transmission station.
Contact Resistance Tester
HARE Series is a micro-ohmmeter manufactured by using advanced engineering technologies which can apply up to 100A/ 200A/ 300A test current. With its easy-to-use software, HARE Series can easily measure contact resistance of circuit breaker, shunt and disconnector by applying adjustable test current up to 100A/ 200A/ 300A depending on the model.
Accessories
Hot Sticks for measurements on high voltage and current potential up to 40 kV and 2000 A.
Accessories
The HT 2010 wireless hand held terminal is designed for recording meter-specific data at meter test systems.
Accessories
The ICT 1.3 three-phase Isolation Current Transformer is used on multi position test benches, when three-phase meters with closed links between the current and voltage measuring circuits (C-P links) are to be tested.
Testing of Closed Links
The ICT 2.3 three-phase Isolation Current Transformer is used on multi position test benches, when three-phase meters with closed links between the current and voltage measuring circuits (I-P links) are to be tested.
Accessories
The IMP-IF1 interface adapter is suitable for interfacing MTE reference standards with meters having retransmitting contacts, open-collector transistor outputs or true S0-outputs to allow full testing of meters with these types of outputs interfaces.
Accessories
Interface between MTE reference standards and meters with ground referenced contacts in the range 50 V … 265 V
Reference Standards
The K2008 is a three-phase comparator of accuracy class 0.005 (50ppm) with direct voltage and current inputs. It has been designed for universal laboratory and test applications and is intended for checking and the calibration of reference standards for electrical power and energy. In addition, it can be integrated into meter or reference standard test systems of highest accuracy.