Products
E-MOBILITY
The PWS 3.3 genX is a combination of a Portable Working Standard of class 0.05 % and an IEC 61000-4-30 Class A compatible Power Quality Analyzer with 4 voltage (U1, U2, U3, UN, UPE) and 4 current channels (direct: I1, I2, I3 and via clamp-on CT: IN / IPE Neutral current / Protection Earth current). The modular concept of the PWS 3.3 genX allows the extension of the direct current measurement range from 12A up to 120A and the addition of a battery pack keeps the device running in the event of interruptions in the supply voltage.
Accessories
The QCD Quick Connection Device is used together with electricity meter test systems, and is recommended for high volume production output.
Accessories
The QCD Form S Quick Connection Device is used for the support and connection of practically all types of self contained (direct connected) or transformer operated ANSI socket meters.
Phantom Loads | Installation Instruments
The Model 4014 integrates four ammeters for the direct and simultaneous reading of 4 CT secondaries up to 10A during the setting up or checking of protection systems while they are in service with normal 50/60Hz primary currents flowing.
Accessories
The SCD 2003 scanning head support is for on-site meter testing with the SH 2003 photoelectric scanning head.
Accessories
The SH 11 universal scanning head is suitable for scanning the marks of mechanical rotating disc meters or the detection of light emitting diodes (LED's) of electronic meters plus simulated pulses on LCD displays. Mode of operation is selectable via a switch.
Accessories
The SH 2003 photoelectric scanning head is suitable for scanning the marks of mechanical rotating disc meters or the detection of light emitting diodes (LED's) of electronic meters. Mode of operation is selectable via a switch.
Accessories
The SH 2015 photoelectric scanning head is designed for the efficient and accurate testing of electronic meters.
Accessories
The SHC range of scanning head supports has been designed for use with the SH 2003 and SH 11 scanning heads.
Energy Meters
The Model 471 is a fully digital kWh meter tester, with an in built 30 Amp phantom load ability. A digital signal processor performs all of the energy calculations and measurements and a separate processor board facilitates parameter entry and results display.
Accessories
The modular Evaluation System SMM 400 provides error calculation, testing of emitting contacts and communication to tariff device units to the meter under test. Four different versions cover all customer requirements.
Power Sources
The SPE 120.3 is a three-phase, computer controlled voltage and current source with 300 or 600 VA for use in meter test systems and in laboratories.